SnuzPod5: Your Most Frequently Asked Questions - Answered

The SnuzPod5 has well and truly landed in the US, and we know you have a lot of questions about this innovative bedside crib. Well, worry no more!

From how to use the SnuzPod5 and its features to how it benefits your baby's sleep routine and your own, we've answered all your burning FAQs and then some.

Use this as a reference point to get all the information you need about the SnuzPod5, so that you and your little one can experience the best night's sleep possible.

Here are your most frequently asked questions about the safety of the SnuzPod5 and how to safely use our bedside bassinet.

The minimum height of your mattress should be 20.9in, and the maximum height should be 28.7in. This is the range that the SnuzPod5 can be adjusted to.

It's important that you position the SnuzPod5 bedside bassinet flush with the top of your mattress to ensure your baby is as safe as possible when sleeping in bedside mode.

As with all bedside cribs, according to the Consumer Product Safety Commission (CPSC)  and in line with safe sleep guidance to place baby on a flat horizontal surface, we can only recommend that the comfort incline mode is used while baby is awake. Please also ensure that the crib is in standalone mode, with the wall zipped up.

All bedside cribs manufactured, including SnuzPod5, need to meet ASTM F2906-23. 

New requirements include a half-height wall for when bassinets are being used in bedside mode, making for easy access during the night whilst providing a barrier that removes the risk of your baby rolling out of the bassinet.

Keeping your SnuzPod5 clean is crucial for the health and safety of both you and your baby. We’ve designed the bassinet to be easy to clean and maintain, but we’ve answered your commonly asked questions to help you out.

It is completely normal for the foam mattress to have a yellow tinge, and this can occur with any polyurethane foam.

It occurs when the mattress is exposed to oxygen, which causes the color to change slightly (oxygenation).

The only way to prevent this is by coloring the foam, which is not something we would do.

To clean your SnuzPod5, start by removing all the bedding and accessories. 

For the frame and any non-textile components, use a damp cloth with mild dish soap and water. Avoid using harsh chemicals or bleach, as they may damage the materials or leave residues that could be harmful to your baby.

Make sure all parts are thoroughly dry before reassembling the crib to prevent any mold or mildew from forming.

 

Bedding is important when it comes to ensuring safe sleep best practices are followed. Here are some of your most frequently asked questions about using bedding in the SnuzPod5.

To fit the Snuz mattress protector correctly, start by ensuring the mattress is fully inserted inside the SnuzPod5 bassinet. The protector should snugly cover the mattress, with the soft, absorbent layer facing upwards.

Ensure the protector’s edges are neatly tucked into the mattress on all sides to prevent it from bunching up or shifting during the night.

For optimal safety and comfort, the protector should be flat and smooth, with no creases or folds.

Snuz crib bedding is designed to fit perfectly with the dimensions of the SnuzPod5 mattress to provide a secure and snug fit. This helps to reduce the risk of excess fabric that could pose a potential safety hazard for your baby.

Also, Snuz bedding is crafted from high-quality materials that are soft and gentle on your baby's skin, ensuring a comfortable sleep environment.

However, if you choose to use other bedding, ensure it fits tightly to the mattress and complies with safe sleep guidelines.

Using a bedside bassinet for the first time can be a bit daunting, so we’ve answered some of the questions we get asked the most about how to use the SnuzPod5 bedside bassinet.

The safety standard for bedside cribs requires all bedside cribs to have a residual barrier or wall which is no less than 4 inches in height (measured from the top of the mattress to the half-height wall) to prevent the child from rolling out of the crib and into the adult bed, whilst allowing easy access to comfort your baby.

Because of this legislation, the mattress of the SnuzPod5 will be slightly lower than your own mattress.

Unique surface-level air-flow vents allow air to pass through the crib at surface level where your baby rests, while an air-permeable mesh liner can be easily unzipped and machine-washed to keep things fresh and free from bacteria.

Shop the SnuzPod5

We don't recommend the use of sensor pads with the SnuzPod5, as this can reduce airflow to the breathable mattress.

 

Attaching the SnuzPod5 to your bed is straightforward with just a few simple steps.

Ensure your SnuzPod5 is at the correct height with your bed. Then, use the provided straps to wrap under your mattress and clip onto the slats of your bedframe, pulling them tight to ensure there is no gap between the two beds.

Double-check all points of contact to confirm the bedside crib is stable and secure before use.

To take the side down on your SnuzPod5, simply unzip the side panel at each end. Gently fold down the panel towards your mattress, tucking it neatly out of the way.

Important: When using your SnuzPod5 in bedside mode, ensure the crib is correctly positioned with the support pole fully seated in the lower channel. For full setup instructions, please refer to the US SnuzPod5 manual.

Your SnuzPod5 is now in open bedside mode, creating an extension of your own sleeping space while keeping your baby in their safe and cozy environment.

The comfort incline mode is designed to gently elevate your baby’s head and upper body to relieve acid reflux symptoms.

To use this feature, simply attach the two wheels to the bottom of the bassinet. This cannot be done when your baby is in the crib. For full setup instructions, please refer to the US SnuzPod5 manual.

Remember, the comfort incline mode should only be used when your baby is awake and under supervision, not during sleep, for safety reasons as per expert guidelines on safe sleeping. Always revert to a flat position for your baby’s sleep time and consult with a healthcare professional if you have concerns about reflux.

Finally, these are the questions you ask us that don’t fit into our other categories. Here’s everything from how the SnuzPod5 differs from our other products to how to build your baby’s crib.

Both SnuzPod4 and SnuzPod5 can be used as a bedside crib or standalone crib and feature a comfort incline option and removable bassinet for use around the home. But the SnuzPod5 takes it a step further with its innovative features.

SnuzPod5 now includes wheels, an optional addition to add to your bassinet stand to make it portable for easy movement around the home.

Our addition of a dual-view mesh windows offer enhanced visibility of baby, keeping them in sight as much as possible.

SnuzPod5 keeps our handy half-height wall setting which can be left in place during the night, making it easy to access baby without having to zip down the wall.

A contemporary color collection, with SnuzPod5 comes style. The latest generation boasts a beautiful selection of interiors inspired colors.

It also meets the latest bedside crib standards (passing ASTM F2906-23), which our original bedside crib didn't have to, and it fits taller beds (up to a maximum adult mattress height of 28.7in).

Yes! We have a really handy YouTube video to help with assembling your SnuzPod5. Assemble in the same way as the SnuzPod5 UK model shown in the demonstration video.

We pride ourselves on ensuring the SnuzPod5 can be assembled by one person, so you can get it set up in plenty of time for your little one's arrival.

See the video below:

The SnuzPod5 is the ideal sleep solution for your baby’s first bed! Not only is it a cozy and comfortable space for your little one to sleep in, but it also meets the highest safety standards to give you peace of mind.

If you have more questions about the SnuzPod5, reach out to our team, who’ll be happy to assist you!

For more information about the SnuzPod5, check out our Sleep Center blog.